Janome Hemmer Foot Set (4mm & 6mm)
for Janome Front Loading and Top Loading Sewing Machines
200 326 001
The Janome Hemmer Foot (sometimes referred to as the rolled hemmer) is used to stitch the narrow rolled hems usually found on shirt tails, table linens and along the edge of frills. The hemmer is designed with a scroll shaped feeder on top and a straight groove on the underside which determines the width of the finished hem. The 4 mm/6 mm set will allow for the use of heavier fabrics.
What Machine settings do I need for sewing Rolled Hems on my Janome:
Stitch: Straight stitch (Center needle position)
Thread tension: “Auto” or 3 – 5
Stitch length: 1 – 2.5
Stitch width: 0
Place the fabric, aligning the hem edge with the guide on the foot. Lower the foot and sew several stitches while pulling both threads to the back. Stop the machine with the needle in the fabric and raise the presser foot. Insert the folded portion of the fabric into the curl of the foot. Lower the foot and sew while lifting up the fabric edge to keep it feeding smoothly and evenly.