Janome Darning Foot 5mm

5mm Darning Foot

Part Number: 200 127 000

The Darning Foot is used to both mend over holes and tears, and to perform decorative stitching by way of Free Motion. Attach the darning foot to the presser bar with the lever positioned over the needle clamp screw. Drop your machine’s feed dogs, or if not an available function, use a darning plate to disable them. Place fabric, ideally secured into an embroidery hoop. Lower the foot and sew at a low speed, moving the fabric back and forth, and alternate to 90 degrees to secure over tears, or manoeuvre over a drawn design. 

Suitable for these models:
1117S, 128, 2003P, 2018S, 2039SN, 2041LX, 2041NX, 2041S, 2041SX, 2049LX, 2049NX, 2118S, 2139N, 2139S, 2141S, 2149SX, 2206, 2212, 2222, 222A, 234, 3128, 360, 380, 381, 405, 41012, 415, 419S, 423S, 4612TM, 530, 531, 609, 609NH, 611, 618, 619, 620, 621, 623, 625(old), 625FA, 626, 630, 631, 632, 639(Jem), 640, 641, 642, 651, 656, 657, 657A, 661(Old), 680, 681, 681D, 684, 692, 693, 710, 7306, 7312, 763, 791FA, 793, 795FA, 802, 803, 844, COMBI 10, FA772, Harmony 1017, Harmony 2041, HD1000, Hello Kitty Full Size 385.11706, Hello Kitty 13512, Hello Kitty 14412, Hello Kitty 15312, Hello Kitty 15822, Hello Kitty Full Size, HF1012, HF106, HF107, HF2022, HF3125, HF-RE1706, JA104, JA106, JA1502, JA1504, JA1506, JA1508, JA1510, JA1512, JA1518, JA1804, JD1803, JD1806, JD1810, JD1812, JD1814, JD1816, JD1818, JD1822, Jem Lite, JF1004, JF1012, JF1014, JF1018, JF1018S, JF1022, JS1003, JS1004, JS1008LE, JW5622, L108, L109, L110, L344, L352, L353, L372, L373, L392, L393, LR1612, LR1616, LR1618, LR1622, QS2250, RX18, RX18S, RX22, TB12

NOTE: This foot will also fit other sewing machine brands, email us with your model number if you would like to know if it will fit your sewing machine.