Ultimate Tape Binder Set for CoverPro

Ultimate Tape Binder Set

All Four Tape Binder sizes with Base Plate and Foot

NOTE: This is for the Janome CoverPro 1000CP, 1000CPX, 2000CPX, and 3000P.

Used for covering the raw edges of stretch fabrics, a tape binder produces the finish that you have come to expect from professionally produced garments. This incredible set of 4 different sizes offers you the ability to tackle any project. With a finished hem ranging in size between 8mm to 25mm, you will be able to give your next neckline, table runner, or quilt the finish it deserves. With the included base plate, Short CoverStitch Foot, and Set Screws, the Tape Binder Attachments in this Set can be used with the Janome CoverPro CP & CPX.

Set Includes:

• 32mm Binder Attachment
• 42mm Binder Attachment
• 50mm Binder Attachment
• 70mm Binder Attachment
• Short Presser Foot For CoverPro
• Set Screw 
• Base Plate
• 2 x Thumb Screw

Instructions:

This Set includes a specialty base plate that sits in the forward slots found on your Coverstitch Machine.Using the Set Screw Provided, line up the base plate in the front slot and screw in the far right opening to secure it in place.

Replace the Standard Presser Foot for the Short Foot provided. Unfold the wire ‘fabric feeding arm’ to the right of the binder attachment and secure to the base plate using the thumbscrews provided.The position of the binder attachment can be maneuvered both by the thumbscrews on the base plate or on the upper section of the binder. 

Please Note: This Tape Binder Set is packed without blister packaging.