Sewist 721

A Foot

You can get away with most projects with only one sewing foot – but geez don’t some of these specialty feet make jobs so much easier?! All sewing machines will have a straight and a zig zag stitch, with some variations in between at the most basic level. Your most common sewing foot will be your Zigzag Foot or ‘A’ Foot. It has both a vertical and horizontal slot to accommodate needle movement in either direction.

---

---

R Foot

What’s this about ‘automatic buttonholes’? Yes! This machine can do a buttonhole in one easy step. Unlike older machines that force you to pencil out the measurement and turn the dial at every corner, the automatic buttonhole ‘R’ foot uses your button of choice at one end to automatically size up the perfect buttonhole and frames it up for easy sewing, all it takes is lowering the button sew lever and away you go! For difficult to sew fabrics, there’s also a stabiliser attachment available.

---

Extra Spool Pin

Why do you need an additional spool pin? Sometimes you might want to mix two coloured threads together, or make use of a twin or triple needle. Where are you going to put that extra spool? Janome includes an additional spool pin with the Sewist 721which you insert into a small slot on the top of the machine. Simple hold all your desired threads together and draw the through the machine as normal and thread the needles via left and right.

---

Bobbins

Now one thing we can never have too many of are the Janome Universal Plastic Bobbins. This is the little spool that you use in the bottom of your machine to help form the stitch, and you use the bobbin winder on top of your machine to wind your choice of thread so your colours match on both sides of the fabric. Most modern machines prefer the use of plastic bobbins because unless advised otherwise, metal bobbins can damage your machine.

---

Needles

You can’t sew without needles! Janome include a small pack of mixed sharp needles to help you get started. Sharps are your standard sewing needle, and range in sizes depending on the weight of fabric you need them for. The average sewing fabric uses a size 14 sharp needle, and it’s recommended that you change your needle every 6-8 sewing hours – even if it’s not broken they can go blunt! There are many types too, so don’t forget to browse other needle types for your next project.

---

 

Spool Holders

Most sewing machines will now provide horizontal spool caps or holders, so the thread winds off the spool the same way it has been wound on, in an even and consistent manner. To keep the spool from dancing around, Janome provides spool caps to affix your thread and help it unwind properly. You receive both small and large spool caps, but we recommend the small for most threads as it doesn’t interfere with the path of smaller spools.

---

If you have any other enquires about these items, just let us know and we can help you identify them and their potential uses.